Door Paint Quantity Calculator
Work out how much paint or polish a door needs — both faces, edges and all your coats. Get the litres, cans to buy and an indicative cost with 18% GST. Indicative India 2026 — confirm the spread rate printed on the tin and check coverage on site.
Your doors
Hard gloss/satin finish; common for flush & panel doors. Paintable area per door ≈ 2.2 × one face (1.9 sqm) = 4.2 sqm — both faces, edges and a little for the frame rebate. Coverage ~13 sqm per litre per coat. Indicative India 2026 — varies by surface porosity, finish and wastage.
Topcoat to buy
0 can
0.6 L needed · 2 coats · 1 door · primer 1 can
Topcoat litres
0.6 L
buy 1 can
Primer litres
0.3 L
buy 1 can
Indicative cost
₹743
incl 18% GST
- Primer280.0 ₹
- Topcoat (2×)₹350
- GST 18%₹113
- Total₹743
Litres by coat (primer + topcoats). Indicative — confirm spread rate on the tin.
Get the finish right, not just the quantity
DesignAI suggests the right primer, finish and prep for your door material and climate — and sense-checks how much paint to buy.
Assumptions & notes
- Paintable area per door ≈ 2.2 × one leaf face — this covers both faces, the four edges and a little for the frame rebate. Heavily carved or panelled doors need a bit more.
- Coverage assumed ~12–14 sqm per litre per coat for smooth, primed surfaces. Bare, porous or rough timber drinks more — round up and keep a touch-up tin.
- Paint is sold in 1 L tins here (also 0.5 L / 4 L), so litres are rounded up to whole cans — you will usually have some left over.
- Costs are indicative India 2026 and shown including 18% GST on the paint. Brand, sheen and city change the price; primer is costed at ~₹280/L.
- This is a planning aid, not a substitute for a painter or carpenter. If the door is warped, water-damaged or the old coat is flaking, prep (sanding, filling, a fresh primer) matters more than the topcoat — a carpenter may be needed first.
Related Guides — Deep-dive reading
Door Painting Guide for Indian Homes (2026): Prep, Paint, Coats & Cost
How to paint a door the right way — remove hardware, clean, sand, fill and prime, then choose enamel, PU or acrylic for wood, flush, metal or WPC doors, brush vs roller vs spray, the correct panel-door painting order, coats and monsoon drying caveats, with ₹ for a DIY repaint vs a painter.
Home Doors & EntrancesDoor Maintenance Guide India: A Seasonal Care Routine to Keep Doors Smooth for Decades
Oil the hinges, tighten the screws, lube the lock, check the seals and re-coat the finish — a simple seasonal calendar that stops Indian doors from binding in the monsoon, sagging, tarnishing on the coast or falling to termites.
Home Doors & EntrancesDoor Polishing & Refinishing in India: Melamine, PU, Duco & Oil Finishes Compared
What melamine, PU, Duco and traditional oil-wax finishes look like, how long they last, and how to strip, sand and re-polish a tired wooden or veneer door — plus indicative ₹ per door.
Home Doors & EntrancesRelated Tools — You may also find these useful
Access Control Cost Estimator
Estimate per-door and whole-building access-control cost in India, with the full component breakdown and GST.
Cost EstimatorAccess Control ROI Calculator
Compare automated access control against guard and manual costs to find the saving and payback.
ROI CalculatorAccess Control System Designer
Design a door access-control system for your building and get the component BOM, topology and indicative cost.
System Designer