Studio Matrx Monthly · Volume 1 · Issue 2 · July 2026
Amogh N P
 In loving memory of Amogh N P — Architect · Designer · Visionary 
← The Parking & Garage Hub

Vehicle Turning Radius Calculator

A parked car needs room not just to sit, but to turn in and out. Pick a vehicle class or enter the manufacturer’s turning circle, and this gives you the turning radius, the wall-to-wall clearance a column or wall must respect, and an indicative minimum aisle width for a right-angle turn.

11.4 m

The diameter of the smallest circle the car can turn in — printed in the car’s spec sheet as the “turning circle” or “turning radius”.

Turning radius (kerb-to-kerb)
0.0 m

Wall-to-wall clearance (with body overhang): 6.3 m radius.

Indicative minimum aisle (90° turn)
5.96.7 m

A rule-of-thumb band for turning into a perpendicular bay. The real figure depends on bay width, angle and column positions — a swept-path check confirms it.

Indicative only. This is a planning rule-of-thumb from the turning circle, not a swept-path analysis. It does not model steering lock, multi-point turns, ramp grades or overhang against specific columns. For anything beyond a simple domestic layout, a parking/transport consultant runs a proper swept-path (vehicle-tracking) study, and the design is confirmed against NBC (SP 7:2026) and your local development-control regulations.