Studio Matrx Monthly · Volume 1 · Issue 2 · July 2026
Amogh N P
 In loving memory of Amogh N P — Architect · Designer · Visionary 
← The HVAC Knowledge Hub

AC Capacity Calculator

Find the right AC tonnage for a room — right-sized, not oversized (an oversized AC cools fast but leaves the room clammy and wastes energy). Set the room area and tick what applies. It’s a planning start; for anything beyond a room, a proper load calculation is best.

150 sq ft

Length × breadth of the room, in square feet (assumes a normal ~10 ft ceiling).

Recommended AC capacity
0 ton

12,000 BTU/hr · 0.94 tons calculated, rounded up to a standard size.

Cooling capacity
0 BTU
per hour
Raw estimate
0.00 t
before rounding up

Buy an inverter unit with the highest BEE star / ISEER you can — it pays back over years of summers. Don’t round up further “to be safe”: oversizing hurts comfort and efficiency.

A planning estimate, not a design. This uses an India-tuned area rule with adjustment factors; real need also depends on insulation, glazing, ceiling height, orientation and local climate. For a whole home, several rooms or any building, use a proper load calculation by an HVAC professional.