Door Cost by City: Full India Price Index Guide India 2026

The single biggest reason two homeowners get wildly different quotes for the same door is geography. A solid-core flush leaf that a Lucknow carpenter supplies for ₹3,700 can cross ₹4,800 at a South Mumbai showroom — identical product, different city. Understanding door cost by city turns those confusing quotes into something you can predict, budget for and negotiate against. This is the pillar page for our city-by-city pricing: it explains the national baselines, the exact cost-index we use across every city guide and our door cost by city calculator, and how to read a quote no matter where you live.

If you only need the raw pan-India numbers, start with the master 2026 door cost guide. This page layers the regional reality on top of it.

The national baseline (supply only, before city multiplier)

Every city number on Studio Matrx starts from one set of pan-India 2026 averages. These are supply-only prices for one standard 7×3 ft (2.1×0.9 m) leaf, before GST and before applying any city multiplier. "Supply only" means just the door — frame, fitting and hardware are separate line items, which is exactly how dealers quote.

A typical 3BHK has 10–14 doors, so a realistic whole-home door budget runs ₹1.2 lakh to ₹4 lakh and beyond, depending on how much teak and how many designer pieces you specify. Whatever city you are in, add 18% GST — wooden and flush doors fall under HSN 4418, while uPVC/PVC sit under HSN 3925, but both carry 18% GST. See our door GST and HSN guide before you compare a quote that mysteriously looks cheaper than the rest.

The 16-city door cost index

This is the heart of the system. Each city carries an index versus the national average of 1.00. Multiply any baseline price above by the city index to get an indicative local figure. We use these exact multipliers across every city guide and inside the calculator so the numbers always agree.

Mumbai sits at the top (1.20) and Lucknow at the bottom (0.92) — a spread of roughly 30% between the costliest and cheapest metros on this list. Chandigarh and Coimbatore land bang on the national average. Read these as indicative ranges, not quotes: the index captures the structural cost difference of a city, but your actual price still moves with brand, finish, dealer margin and how hard you negotiate.

What drives door cost by city

Four structural forces explain almost the entire spread. We unpack them in detail in why door prices vary by city, but in short:

• Labour rates. Carpenter and fitter day-rates in Mumbai and Bengaluru run far above Lucknow or Indore, and installation is a per-door line item, so it scales directly into your total.
• Showroom and real-estate cost. A door displayed in a glossy showroom on prime metro frontage carries that rent in its sticker price; a Tier-2 timber market with low overheads does not.
• Transport and logistics. Doors are bulky and heavy. Cities far from manufacturing clusters (much of flush/WPC production sits around Gujarat, Punjab and the south) pay more in freight.
• Local timber availability. Coastal and southern markets get teak and hardwood more cheaply and in better grades; northern plains lean on sal and imported timber, shifting the premium-segment maths.

This is also why the metro-versus-Tier-2 gap is so consistent — see metro vs Tier-2 door pricing. Coastal cities have their own quirks around humidity and timber, covered in coastal-region door buying.

Worked examples

Take a solid-core flush (BWR) door that averages ₹4,000 supply-only nationally.

So the same flush door runs roughly ₹4,800 in Mumbai versus ₹3,680 in Lucknow before GST — about ₹1,100 of pure geography on one leaf. Multiply that across 12 doors and the city alone swings your shell budget by ₹13,000–₹14,000.

Now a higher-spec case — a teak panel main door averaging ₹30,000 supply-only:

Chennai, despite being a metro, often does better on teak than the index suggests because South India's timber supply is deep — a reminder that the index is a starting point, not a ceiling. Run your own spec through the door cost by city calculator or compare two cities side by side with the city door price comparison tool.

Find your city

Each city below has its own guide with local markets, timber preferences and a full price table at that city's index. Pick yours:

• West: Mumbai, Pune, Ahmedabad, Surat, Nagpur, Indore
• North: Delhi-NCR, Jaipur, Lucknow, Chandigarh
• South: Bengaluru, Hyderabad, Chennai, Kochi, Coimbatore
• East: Kolkata

Prefer to think by region? We also have a North India door buying guide and a South India door buying guide that group markets, brands and timber norms by zone.

How to use these numbers without getting burned

Three habits keep you safe. First, always reconcile supply-only against installed — a quote that looks low may simply have stripped out frame, fitting and hardware, all of which our baseline table prices separately. Second, confirm GST is in the number; an 18% gap is exactly the size of a forgotten tax line. Third, treat the index as your floor for negotiation: if a Mumbai dealer quotes 1.4× the national average on a commodity flush door, you have a data-backed reason to push back. Our negotiating door prices guide and the door quotation guide walk through the exact lines to use.

Frequently asked questions

Why does the same door cost more in Mumbai than in Lucknow?

Mostly labour rates, showroom and real-estate overheads, transport from manufacturing clusters, and local timber supply. Mumbai's index of 1.20 versus Lucknow's 0.92 captures roughly a 30% structural gap on identical products. Brand and finish then move the number further.

Are these city prices actual quotes I can hold a dealer to?

No — they are indicative ranges built by applying a city index to pan-India averages. Use them to budget and to sanity-check a quote, not as a fixed price. Always get written, itemised quotations and add 18% GST.

Does the city index include GST and installation?

No. The index applies to supply-only baselines before tax. Add 18% GST (HSN 4418 for wooden/flush, 3925 for uPVC/PVC) and a separate per-door fitting charge of ₹1,000–₹2,500. See the door installation cost guide for fitting detail.

Which Indian cities are cheapest for doors?

On this index, Lucknow (0.92), Indore (0.93) and Nagpur (0.94) are the most affordable, while Mumbai (1.20), Bengaluru (1.15) and Delhi-NCR (1.12) are the priciest. Coimbatore and Chandigarh sit on the national average.

How much should a 3BHK door budget be in my city?

Start from the pan-India ₹1.2L–₹4L range for 10–14 doors, then multiply by your city's index. A Bengaluru 3BHK lands roughly 15% above a national-average city; a Lucknow one about 8% below. The door budget planner does this for your exact door list.

Should I buy in a cheaper nearby city and transport doors home?

Usually not worth it. Doors are bulky, freight is expensive, and you lose local warranty and after-sales support. The 8–10% you might save on the door is often eaten by transport and the risk of transit damage on an unwieldy item.