Door Cost in Pune (2026): Prices, Markets & Real Examples — What doors actually cost in Pune in 2026 — city index 1.10, worked examples with 18% GST, real markets and value versus Mumbai.

Showroom display of flush, WPC and teak doors at a Pune timber and plywood market

If you are renovating a flat in Kothrud or fitting out a new tower in Hinjawadi, the door cost in Pune is one of the easier line items to estimate once you know the city multiplier. Pune sits at a cost index of 1.10 against the pan-India average — about 10% dearer than the national benchmark, but meaningfully cheaper than Mumbai. This guide turns that index into real 2026 prices, with worked examples that always include 18% GST, the actual markets where Punekars buy doors, and an honest read on where the city stands on value.

These are indicative ranges, not quotations. Door prices move with timber lots, brand, finish, hardware and how many doors you order at once. Treat the numbers below as a planning band, then get two or three written quotes before you commit. For the national baseline, keep the master 2026 door cost guide open in another tab, and to compare cities side by side see the phase pillar on door cost by city.

How the Pune index works

Every price in our city series starts from a pan-India supply-only average for a standard 7×3 ft (2.1×0.9 m) door leaf, then multiplies by the local index. For Pune that factor is 1.10.

The arithmetic is simple: national price × 1.10 = Pune supply price (before GST). A solid-core flush door that averages ₹4,000 nationally runs about ₹4,400 in Pune before tax, or roughly ₹5,190 with 18% GST. Do the same for every door type and you have a credible budget before you set foot in a showroom.

Door type	National avg (₹, supply)	Pune ×1.10 (₹, supply)	Pune + 18% GST (₹)
Hollow-core flush (commercial)	1,800–3,000	1,980–3,300	2,336–3,894
Solid-core flush (BWR)	3,000–5,500	3,300–6,050	3,894–7,139
Laminate / membrane flush	4,000–7,000	4,400–7,700	5,192–9,086
WPC door	4,500–7,500	4,950–8,250	5,841–9,735
PVC door (bathroom)	1,800–4,000	1,980–4,400	2,336–5,192
uPVC door	8,000–16,000	8,800–17,600	10,384–20,768
Sal / hardwood panel	9,000–16,000	9,900–17,600	11,682–20,768
Teak panel / carved	22,000–45,000+	24,200–49,500+	28,556–58,410+
Designer main door	30,000–80,000+	33,000–88,000+	38,940–103,840+

Frames, fittings and hardware are separate. In Pune budget roughly ₹2,200–₹3,850 for a sal frame, ₹1,100–₹2,750 for fitting per door, and ₹1,320–₹2,750 for a basic hardware set — each before GST. Installation labour in and around Pune has crept up with the city's construction boom, so confirm whether a quote is supply-only or installed.

A worked example: doors for a 3BHK in Pune

A typical Pune 3BHK has 10–14 doors. Here is a mid-range build for a 12-door flat, mixing a teak main door, laminate flush internal doors and WPC for the wet areas — all at the Pune index, with GST shown at the end.

Item	Qty	Pune unit (₹, supply)	Line total (₹)
Teak carved main door (leaf)	1	30,000	30,000
Laminate flush internal doors	7	6,000	42,000
WPC bathroom doors	3	6,500	19,500
Utility/PVC door	1	3,500	3,500
Sal frames	12	3,000	36,000
Hardware sets	12	2,000	24,000
Fitting / installation	12	1,800	21,600
Subtotal (supply + fit)			1,76,600
GST @ 18%			31,788
Total			₹2,08,388

That lands a 12-door Pune flat at just over ₹2 lakh all-in for a sensible mid-spec. Trim to all-flush internals and a solid-core (not teak) main door and you can bring it under ₹1.5 lakh; go designer on the main door and add veneer internals and it climbs past ₹3 lakh. To run your own mix, the door cost by city calculator applies the Pune index for you, and the door GST calculator splits out the 18% cleanly for your records.

Where to buy doors in Pune

Pune has a genuinely deep market — a legacy timber trade plus a wall of new-build demand from Hinjawadi to Wagholi. These are the hubs where Punekars actually buy doors and plywood:

Bhawani Peth and the old timber market — the traditional wholesale belt for timber, sal frames, flush doors and plywood; sharp prices if you can negotiate and arrange transport.
Market Yard (Gultekdi) — large hardware, plywood and building-material traders; good for flush doors, laminates and hardware in volume.
Pimpri-Chinchwad (PCMC) dealers — showrooms and distributors serving the industrial belt and the huge PCMC housing stock; convenient for buyers in Pimpri, Chinchwad, Akurdi and Nigdi.
Wakad / Hinjawadi belt — newer showrooms riding the IT-corridor apartment boom, handy for WPC, uPVC and ready-fit flush doors for fresh handovers.
NIBM Road / Kondhwa and Baner–Aundh — designer and branded showrooms catering to premium villa and high-rise buyers wanting veneer, teak and designer main doors.

For branded products, look for authorised dealers of CenturyPly / Century Doors, Greenpanel, Greenply, Action Tesa, Alstone and Merino on the flush/WPC side, and Fenesta, Weatherseal (Asian Paints) or Aparna Venster for uPVC. A balanced look at the leading names is in best door brands India, with deeper picks in best WPC door brands India.

What drives the door cost in Pune

Pune's 1.10 index is the sum of several local forces. The city's relentless apartment growth — IT corridors at Hinjawadi and Kharadi, plus PCMC's industrial base — keeps fitting labour and skilled carpentry in steady demand, nudging installation rates up. Showroom and real-estate costs in Baner, Aundh and Kalyani Nagar add to retail margins. And a fair share of premium timber, veneer and branded doors arrives via Mumbai, so transport and the proximity to Mumbai's pricing pull Pune above the national line.

The upside is value. Pune is close enough to Mumbai to share its supply chains, yet its land and showroom costs are lower, so the same door is typically 8–9% cheaper in Pune than in Mumbai. The chart below shows where Pune sits among the major metros.

Pune vs Mumbai: the value gap

Pune's biggest pricing story is its relationship with Mumbai. The two cities share dealers, transporters and many of the same brands, but Pune's lower retail overheads mean you keep more in your pocket for the identical product. On a teak main door that runs about ₹54,000 supply in Mumbai (₹45,000 × 1.20), the same leaf is roughly ₹49,500 in Pune — a saving of around ₹4,500 before GST, and more once tax compounds. Across a full 12-door flat that gap can be ₹15,000–₹25,000.

Door type (₹, supply)	Pune ×1.10	Mumbai ×1.20	Pune saving
Solid-core flush (₹4,000)	4,400	4,800	~₹400
WPC door (₹6,000)	6,600	7,200	~₹600
uPVC door (₹12,000)	13,200	14,400	~₹1,200
Teak main door (₹45,000)	49,500	54,000	~₹4,500

Many Pune buyers near the expressway are tempted to source from Mumbai for choice — but once you add transport, GST and the risk of damage in transit, the local PCMC and Market Yard dealers usually win on landed cost. For the broader regional picture, see the west India door buying guide.

Local timber and style preferences

Pune leans practical-premium. In older Peth-area homes and bungalows, traditional teak and sal panel doors remain the aspiration for the main entrance, often with carved or grooved fronts. The vast new-apartment stock in PCMC, Wakad and Wagholi runs mostly on laminate or membrane flush internal doors for cost and consistency, with WPC or PVC in bathrooms to handle Pune's humid monsoon. uPVC is gaining ground in IT-corridor towers for balconies and utility entries. If your entrance design also has to respect direction, pair this with Vastu for the main door before you finalise the leaf and frame.

Whatever the spec, get an itemised written quote that separates leaf, frame, hardware, fitting and GST. The door quotation guide India shows what a clean Pune quote should contain, and the door installation cost India explainer helps you sanity-check the fitting line.

Frequently asked questions

How much do doors cost in Pune for a full 3BHK in 2026?

Budget roughly ₹1.5–₹3 lakh all-in for 10–14 doors, including frames, hardware, fitting and 18% GST. A mid-spec 12-door flat with a teak main door and laminate internals lands around ₹2.05 lakh. Strip to all-flush and it drops below ₹1.5 lakh; go designer and it crosses ₹3 lakh.

Why are Pune door prices higher than the national average?

Pune carries a 1.10 index — about 10% above the pan-India average — because of strong construction-driven labour demand, higher showroom and real-estate costs in areas like Baner and Aundh, and premium stock arriving via Mumbai. It is still well below Mumbai's 1.20.

Is it cheaper to buy doors in Pune or Mumbai?

Pune is typically 8–9% cheaper than Mumbai for the same door, since the cities share supply chains but Pune has lower retail overheads. Sourcing from Mumbai rarely pays off once you add transport, GST and damage risk — local PCMC and Market Yard dealers usually win on landed cost.

Where can I buy doors cheaply in Pune?

The Bhawani Peth timber belt and Market Yard (Gultekdi) traders offer the keenest wholesale prices if you negotiate and arrange your own transport. PCMC and Wakad–Hinjawadi showrooms are more convenient for branded, ready-fit doors near the new-build corridors.

Do Pune door prices include GST?

Usually not — most quotes are pre-GST. Doors attract 18% GST (wooden/flush under HSN 4418, uPVC/PVC under HSN 3925). Always add 18% to the supply or installed figure, and ask for a GST invoice so the tax is documented. See the door GST and HSN guide.

Are these Pune prices fixed?

No — they are indicative 2026 ranges that move with timber lots, brand, finish, hardware and order size. Use them to set a budget band, then collect two or three written quotes. The door cost by city calculator will apply the Pune 1.10 index to your exact door mix.