Door Fitting Tool Kit Builder
Tell us the job, which door types you'll hang and whether mortise locks or fire doors are involved — get a recommended hand, power, jig and support tool list as a checklist, with an indicative ₹ total. Indicative India 2026; confirm with your carpenter / fitter on site.
Your job
A handful of doors; some power tools speed this up. The kit grows with job tier: a pro fit-out adds jigs, a router and a lock morticer that pay back across many doors. Fire-door work adds ≤3 mm feeler gauges and an intumescent / smoke-seal kit (NBC / IS 3614 guidance). Indicative India 2026 — varies by brand and vendor.
Recommended kit (incl. GST)
0 tools
Indicative total ₹21,830 incl. 18% GST · 1 door type
Tools
16
Total
₹21,830
incl. GST
GST 18%
₹3,330
included
- Hand tools₹5,600
- Power tools₹4,500
- Jigs & guides₹1,500
- Support & safety₹6,900
Indicative kit cost by category — confirm with your supplier on site.
Your tool checklist
How many tools in each category
Pro fit-outs lean on jigs and power tools; a DIY single-door job is mostly hand tools and a drill.
Readiness note
This is a lean kit for handyman — a few doors. You can rent the heavier power tools to start. Aim for even 2–4 mm margins, a plumb frame (±1.5–2 mm) and one-hand operation. Indicative only — confirm tools and prices with your fitter on site.
Build the right kit for your job
DesignAI can sense-check this kit against your door schedule and budget — what to buy, what to rent, and what fire-door or mortise-lock work needs.
Assumptions. Tool prices are indicative India 2026 retail figures (entry-to-mid brands) and vary widely by make, quality and city — a basic DIY door kit runs ₹3,000–8,000, a mid kit ₹10,000–25,000 and a pro kit ₹25,000–60,000+. Costs shown are ex-GST until you add the 18% GST toggle; reuse and rentals can cut spend sharply.
This is a planning aid, indicative — confirm with your carpenter / fitter on site. It is guidance, not a substitute for a qualified fitter or site engineer, and does not certify fire-door, accessibility or structural compliance.
Related Guides — Deep-dive reading
Door Fitting Tools Guide: The Fitter's Kit (India 2026)
Every hand tool, power tool, jig and support an Indian carpenter needs to hang and fit doors — organised by category, with indicative kit costs.
Home Doors & EntrancesDoor Fitting Hand Tools: Chisels, Planes, Gauges (India 2026)
A trade guide to the hand tools every door fitter needs in India — chisels, planes, marking gauges, squares and rasps — how to choose them, why sharp matters, and what they cost.
Home Doors & EntrancesDoor Fitting Power Tools: Pro Buyer's Guide (India 2026)
Cordless drills, planers, routers, jigsaws, multi-tools and the right bits for fast, clean door fitting on Indian sites.
Home Doors & EntrancesRelated Tools — You may also find these useful
Access Control Cost Estimator
Estimate per-door and whole-building access-control cost in India, with the full component breakdown and GST.
Cost EstimatorAccess Control ROI Calculator
Compare automated access control against guard and manual costs to find the saving and payback.
ROI CalculatorAccess Control System Designer
Design a door access-control system for your building and get the component BOM, topology and indicative cost.
System Designer