Aluminium Door Cost in India 2026: ₹/Sq Ft by Profile Grade, Finish, Glazing & Hardware

An aluminium door quote hides far more than its single bottom-line number suggests. The same "aluminium glass door" can cost ₹450 or ₹1,200 a square foot depending on one thing most homeowners never ask about: the grade of the profile section. Add the finish surcharge, the glass grade, the rollers and locks, fitting and 18% GST, and two quotes for the "same" balcony door can differ by 60%. This 2026 guide breaks aluminium door cost in India down honestly — by profile grade, finish, glazing and hardware — with a worked utility/balcony example you can copy straight onto your own quotation. For how aluminium doors actually behave in coastal salt, monsoon humidity and daily use, pair this with our aluminium doors guide for India; for the bigger picture across every door type, see the master door cost benchmark.

All figures below are indicative and vary by city, vendor, profile brand and glass grade. Treat them as a sanity-check range, not a fixed price list.

How aluminium doors are priced in India

Fabricators almost always quote an aluminium door per square foot of the total opening — width × height of the frame box — not per leaf. A 3.5 ft × 7 ft utility opening is roughly 24.5 sq ft, and the system rate is multiplied across that whole area whether the door slides or swings. This is the same per-sq-ft convention used for sliding doors and glass doors.

The square-foot rate usually bundles the aluminium profile, the glass or panel infill and basic assembly — but whether it includes track, premium rollers, locks, handles and fitting is the single biggest source of quote confusion. Always ask the fabricator to mark each line as "included" or "extra" before you compare two quotes, because a low headline rate often means hardware and labour are stacked on top.

Four things move the rate the most:

• Profile grade — economy "domal"/local section is cheapest; branded system sections cost more; thermal-break premium sections cost the most.
• Finish — mill-finish/painted is cheapest; powder-coat and anodised add a surcharge; wood-finish (sublimation/laminate-look) adds the most.
• Glazing — plain float vs toughened (IS 2553) vs double-glazed sealed unit (DGU) changes the price meaningfully.
• Hardware tier — basic vs sealed-bearing rollers (sliding), or hinge/handle/lock quality (openable).

Aluminium extrusions for doors are generally rolled to IS 733 / IS 1285, and any glass at floor level should be toughened to IS 2553 — points worth naming in your quote so "aluminium" and "glass" are not left vague.

Profile grade × ₹ per sq ft of opening

This is the heart of aluminium door pricing. The table below is the system rate only (profile + standard glass infill + basic assembly), before finish surcharge, glazing upgrade, hardware, fitting and GST.

A domal door looks identical to a system door on day one. The difference shows in year three: thinner walls flex, gaskets perish, and a coastal door corrodes faster. For where each grade genuinely earns its premium — and where domal is perfectly fine — read the aluminium doors guide rather than choosing on rate alone.

Finish: powder-coat vs anodised vs wood-finish

The bare profile rate above assumes a basic finish. The surface treatment is both a cost line and a durability decision, especially in coastal and high-rainfall India.

For homes near the sea, anodised profiles plus stainless hardware are the corrosion-smart specification — covered in the best door material guide. Inland, a quality powder-coat is usually enough.

Glazing: single, toughened and double-glazed

For any glazed aluminium door, the glass is a separate cost lever — and at floor level, a safety one.

• Plain float vs toughened (IS 2553): toughened glass is effectively mandatory for any large glazed leaf at floor level — it is a safety requirement, not a luxury. Expect toughened to add roughly ₹40 – ₹90 / sq ft over plain glass. Never accept plain annealed glass in a full-height aluminium door.
• Single vs double glazing (DGU): a double-glazed sealed unit cuts heat and noise and adds roughly ₹150 – ₹400 / sq ft, justified for west-facing balconies, AC bedrooms or roadside flats — and it pairs naturally with thermal-break profiles.
• Frosted / tinted / reflective: privacy and solar-control glass typically add a modest premium over plain toughened; useful for bathroom and utility aluminium doors.

For balcony and utility doors, also budget a mosquito mesh panel if you want to leave the door open in the evenings — see mosquito mesh doors.

Hardware, and sliding vs openable cost difference

Aluminium doors come in two broad action types, and they carry different hardware bills.

Sliding vs openable — which costs more? For the same opening, an openable (casement) aluminium door is usually a touch cheaper on hardware (hinges and a stay vs a track-and-roller system), and a sliding door costs more once you add quality rollers, track and soft-close — but sliding saves the swing-clearance floor space, which is why balconies and utilities default to it. The system rate per sq ft is broadly similar; the gap is mostly in the hardware line. For locking and handle choices across door types, see the door hardware guide.

Worked example: a balcony / utility aluminium door

Let us cost a typical 3.5 ft wide × 7 ft high (24.5 sq ft) two-panel aluminium-framed sliding door with toughened glass and a powder-coat finish — the classic kitchen-to-utility or bedroom-to-balcony door.

Drop to an economy domal section at ₹400/sq ft with basic rollers and the same opening lands closer to ₹19,000 – ₹22,000 installed. Step up to a thermal-break section with wood-finish and double glazing and the same little balcony door can cross ₹55,000 – ₹65,000. That spread — for an identical-looking door — is exactly why profile grade, finish and glazing matter far more than haggling on labour.

Cross-check your own numbers with our door cost calculator, and for material-vs-material trade-offs use the door material comparison tool.

How to read an aluminium-door quote without getting stung

• Insist the quote names the profile brand/grade — "aluminium" alone tells you nothing; domal and system sections sit ₹150–₹400/sq ft apart.
• Confirm the finish (powder-coat or anodised) and ask for anodised + stainless hardware for coastal homes.
• Confirm the glass is toughened (IS 2553) for any floor-level leaf, and DGU if you want heat/noise control.
• Ask the roller rating in kg for sliding leaves — a heavy glass leaf on light rollers is a future repair bill.
• Make sure track, rollers, locks, gaskets, fitting and GST appear as separate line items, not buried in the per-sq-ft rate.

Frequently asked questions

What is the cost of an aluminium door per sq ft in India in 2026?

Indicatively, economy domal sections run about ₹300 – ₹500 / sq ft of opening, standard branded system sections about ₹450 – ₹900 / sq ft, and thermal-break premium sections ₹1,100 – ₹2,200+ / sq ft — all before finish surcharge, glazing upgrade, rollers, locks, fitting and 18% GST. Figures are indicative and vary by city and vendor.

Why is the profile grade such a big cost difference?

Because a heavier, branded system section uses more aluminium, better gaskets and engineered hardware channels than a thin economy "domal" section. It stays rigid, seals against rain and dust, and resists corrosion for far longer. A domal door looks identical on day one but flexes and leaks sooner — so the grade decides both price and lifespan.

Is a sliding or openable aluminium door cheaper?

For the same opening the system rate is similar, but an openable (casement) door is usually a little cheaper on hardware (hinges and a stay) while a sliding door costs more once you add quality rollers, track and soft-close. Sliding still wins on floor space, which is why balconies and utilities favour it.

How much does the powder-coat or anodised finish add?

Powder coating typically adds about ₹30 – ₹70 / sq ft and anodising about ₹50 – ₹100 / sq ft, while a wood-finish (sublimation/laminate-look) can add ₹80 – ₹180 / sq ft. Anodising is the corrosion-smart choice for coastal homes; powder-coat is usually enough inland.

Does aluminium door cost include GST?

Usually not in the headline rate. Fabricated aluminium doors typically attract 18% GST, so add it to the subtotal. Always confirm whether a quote is inclusive or exclusive of GST before comparing two vendors.

For the full picture across types, materials and budgets, return to the home doors complete guide for India, read the aluminium doors material guide, and compare related cost guides: sliding door cost, glass door cost and the master door cost benchmark. Figures throughout are indicative and vary by city and vendor.