Door Ironmongery Schedule Builder
Pick a door set's hinges, lock, lever, closer, seals, stops, bolts and viewer — and generate a clean ironmongery schedule with an indicative hardware total incl 18% GST. Indicative India 2026 rates; confirm finishes and quantities with your carpenter/fitter on site.
Door set items
Standard keyed mortise body + cylinder; 60mm backset. Lever centre ~1000mm; mortise lock ~900mm; viewer ~1400-1500mm. Accessible (RPwD) levers sit 800-1100mm. Indicative India 2026 rates — vary by brand, finish and vendor.
Hardware total (incl. GST)
₹0
1 set · 6 items/set · ₹4,140/set ex-GST
Per set
₹4,140
ex-GST
Items / set
6
pieces
Total
₹4,885
incl. GST
- Butt hinges₹660
- Lock₹1,900
- Lever handle (pair)₹1,400
- Door stop₹180
Hardware cost by item, across 1 set. Indicative — confirm with your fitter.
Ironmongery schedule
One door set; rates ex-GST. Multiply by 1 for the full order.
Where the hardware spend goes
Cost by item across 1 set, ex-GST.
Get the ironmongery schedule right
DesignAI checks your schedule for completeness, fire integrity, accessible lever heights and security — and suggests finishes that match your interiors.
Notes & assumptions
- Rates are indicative India 2026 per-item benchmarks; final prices vary by brand, finish (SS / brass / matte black), gauge and vendor.
- Hinge default is 3 per leaf (top ~150-200mm from head, bottom ~250mm from floor, third at the mid/one-third point). Double-leaf doors need hinges on both leaves plus flush bolts on the slave leaf.
- The order total includes 18% GST when toggled on. Fitting labour, the leaf, frame and glazing are not included here — use the door cost calculator for an all-in price.
- Fire doors must use a certified tested set (NBC / IS 3614): fire-rated hinges, continuous intumescent + smoke seals, a fire-rated self-closer and “Fire door keep shut” signage, with leaf gaps ≤3mm. Do not mix-and-match parts on a rated assembly.
- Accessible levers (RPwD) should sit 800-1100mm from finished floor and operate one-handed; viewers at ~1400-1500mm.
- This is a planning aid, not a substitute for a qualified fitter or site engineer — indicative; confirm every quantity and finish with your carpenter/fitter on site.
Related Guides — Deep-dive reading
Ironmongery Schedule for Doors: Hardware Sets (India 2026)
How to build a door ironmongery schedule — per door-set hinges, lock, lever, closer, seals, bolts and finishes — that drives clean procurement.
Home Doors & EntrancesFitting Door Hardware: Ironmongery Install Guide India 2026
The new-fit craft of mounting hinges, locks, levers, closers, bolts, stops and seals onto a door and frame — in the right order, at the right heights.
Home Doors & EntrancesDoor Hardware Guide India 2026: Hinges, Handles, Locks, Closers and Every Fitting Explained
What each piece of door hardware actually does, where it belongs, which material (SS304, brass, zinc or iron) survives Indian conditions, the quality signals to check before you pay, and a buyer's checklist with 2026 prices.
Home Doors & EntrancesRelated Tools — You may also find these useful
Access Control Cost Estimator
Estimate per-door and whole-building access-control cost in India, with the full component breakdown and GST.
Cost EstimatorAccess Control ROI Calculator
Compare automated access control against guard and manual costs to find the saving and payback.
ROI CalculatorAccess Control System Designer
Design a door access-control system for your building and get the component BOM, topology and indicative cost.
System Designer