Studio Matrx Monthly · Volume 1 · Issue 1 · June 2026
Amogh N P
 In loving memory of Amogh N P — Architect · Designer · Visionary 
Screed Calculator

Subfloor Screed Calculator

Enter your floor area, the screed thickness and your cement-sand mix ratio. Get the cement bags, sand quantity and the rupee cost for a cement-sand levelling bed. Indicative India 2026 — site mix and rates vary.

RCC slabscreed bed

Your screed

Floor area is 1,000 sq ft. Wet volume = area × thickness × wastage; dry volume = wet × 1.33 (voids & bulking). One bag = 50 kg cement (~0.0347 m³). Recommended thickness 25–75 mm. Common all-round levelling mix. Indicative — verify on site.

Cement needed & estimated cost

0 bags

about 0 in cement & sand

Wet volume

4.09 m³

area × thickness

Dry volume

5.44 m³

× 1.33 factor

Cement

27 bags

0.91 m³

Sand

160 cft

≈ 7.25 ton

Material cost split: cement vs sand. Excludes labour, water-proofing & GST.

Planning the full floor build-up?

DesignAI helps you spec screed, waterproofing, adhesive and the finish layer for your rooms, climate and budget.

Go deeper

Disclaimer: figures are indicative for an Indian cement-sand screed in 2026. Actual cement and sand vary with site conditions, sand bulking/moisture, base unevenness and contractor practice. Excludes labour, water-proofing membrane, water and GST. Confirm quantities with your contractor.