Specialty Door Cost Estimator

Pick a specialty or industrial door — fire, blast, lead/radiation, MRI, cleanroom, cold-store, high-speed, flood, acoustic, revolving, sectional, shutter, hangar or air curtain — set the size or quantity and a spec tier to get an indicative ₹ range incl 18% GST. These doors are project-engineered: treat this as a budgeting band, not a quote.

Indicative & quote-only. Specialty doors are project-engineered. Use this for early budgeting; the real price comes from a vendor spec, and the design must be signed off by a qualified consultant (fire / structural / RSO / acoustic as applicable).

Your specialty door

Door type

Spec tier

Quantity

Priced per-door. Quantity 1. 60 min ≈ ₹15–35k; 120 min ≈ ₹30–70k. Rating belongs to the tested assembly, not just the leaf. Indicative India 2026 — supply bands before GST, install added as a percentage of supply.

Sign-off required: fire consultant (IS 3614 / BS 476-22 tested assembly).

Indicative all-in range (incl. 18% GST)

₹0 – ₹0

Likely mid-point ≈ ₹40,880 · 1 unit

Low

₹20,355

best case

Likely

₹40,880

High

₹61,404

worst case

All-in budgeting range. Indicative — a vendor spec replaces this.

Supply (ex-GST)₹15,000 – ₹45,250
Installation / commissioning₹2,250 – ₹6,788
GST @ 18%₹3,105 – ₹9,367

How specialty doors compare, all-in

Indicative all-in midpoints (standard tier, fitted, incl. GST; area-based types at a representative opening). Your selected type is highlighted. Note the very wide spread — from shutters to MRI RF doors.

Get the right specialty-door spec

DesignAI helps you frame the performance brief — rating, size, compliance and sign-off — so the vendor quote you collect is apples-to-apples, and sense-checks the budget band.

Go deeper

Specialty door cost guide Specialty doors explained Industrial door types Fire door ratings

Assumptions: bands are India 2026 supply-only figures before GST; the spec tier selects the lower or upper half of each band; installation is added as a percentage of supply (12–25% by door type); GST is 18%. Area-based types (sectional, hangar = ₹/sqm; rolling shutter = ₹/sqft) multiply the rate by the opening you enter. These doors are project-engineered and the figures are indicative budgeting bands, not quotes — get a vendor spec, and have the design signed off by the relevant qualified consultant (fire consultant for fire doors, structural engineer for blast and flood, RSO + AERB for radiation, acoustic consultant for STC-rated doors).

Related Guides — Deep-dive reading

Specialty Door Cost in India: Price Bands Guide (India 2026)

Indicative ₹ cost bands for fire, blast, bullet, lead, cleanroom, freezer, high-speed and other project-engineered doors in India.

Home Doors & Entrances

Specialty & Industrial Doors in India: Guide (India 2026)

How to identify, specify and route the right fire, security, shielding, hygiene, water and high-throughput door for any hazard or environment.

Home Doors & Entrances

Factory Door in India: Material Gates, Production-Floor Roll-Ups, Personnel and Fire-Compartment Doors (2026)

A zone-by-zone guide to doors for a manufacturing plant in India - the big sliding or sectional material gates for trucks and forklifts, the high-speed and strip-curtain doors that separate dusty, hot or clean production zones, the steel and FRP personnel doors beside them, and the IS 3614 fire-compartment and panic-barred fire-exit doors - with indicative per-door and per-gate costs.

Home Doors & Entrances

Related Tools — You may also find these useful

Acoustic Door STC Calculator

Work out the STC rating and door build — single leaf, drop seal or sound-lock — to hit your target noise level.

STC Calculator

Blast Door Load Calculator

Map peak overpressure to an indicative blast force and door class — a screening aid before a blast engineer.

Blast Calculator

Bulk Door Order Estimator

Estimate a builder project door order with volume-discount tiers, city index and 18% GST.

Bulk Estimator